Atop Technology SE5002D User manual - Manual (Page 34)

Atop Serial Device Server
SE5002D
User Manual V. 1.1
3.2.12 Setting Packet Delimiter
Packet delimiter is a way for packaging serial data. It can prevent serial data from being
truncated by packaging them in the same Ethernet packet. SE5002D provides two kinds of
packet delimiter: Timer and Character. The default value for the timer is 2 ms (0 ms to disable
this function). This means that if SE5002D does not receive new serial data within 2 ms, it will
send out all the serial data in buffer in one packet over Ethernet. The way to change the
delimiter timer is shown in the following figure, Fig. 3. 14 .
Fig. 3. 14