Atop Technology SE5002D User manual - Manual (Page 20)

Atop Serial Device Server
SE5002D
User Manual V. 1.1
3. Software Setup
SE5002D Serial device server is shipped with default settings shown in the following table.
Table 3. 1
Property Default Value
IP Address 10.0.50.100
Gateway 10.0.0.254
Subnet Mask 255.255.0.0
User Name Admin
Password Null (leave it blank)
COM 1 9600, None, 8,1, No flow control, buffer disabled, packet delimiter timer 2ms
Link 1 Type: TCP Server, Listen port4660, Filter=0.0.0.0, Virtual COM disabled
SysName of SNMP Name
SysLocation of SNMP Location
SysContact of SNMP Contact