2 running serial/ip in windows, Running serial/ip in windows, Fig. 4. 3 – Atop Technology SE5002D User manual User Manual

Page 65: Fig. 4. 4

Atop Serial Device Server

SE5002D

User Manual V. 1.1

4.2.2 Running Serial/IP in Windows

Find the Serial/IP Control Panel from:



Start→All programs→Serial/IP→Control Panel



In the Windows Control Panel, open the Serial/IP applet.



In the Windows notification area,

, right click on the Serial/IP tray icon and

click on Configure to open the Control Panel

Fig. 4. 3

If no Virtual COM port is selected, a dialog will pop up and ask to select at least one port as the

Virtual COM port before proceeding,