Atop Technology SE5002D User manual - Manual (Page 53)

Atop Serial Device Server
SE5002D
User Manual V. 1.1
3.5.5 Multiple TCP Connections
To have more than one TCP Client connecting to SE5002D in TCP Server mode, contact Atop
Technical Support to obtain a special multi-connection version firmware. After the firmware is
uploaded to the SE5002D, the WebUI will have one additional option called
“Multiple_Connections” as in Fig. 3. 30 . The Multi-Connection option will allow up to a
maximum of four TCP Client connections. SE5002D will broadcast serial data to all connected
TCP Clients. Note that it is also possible to use this multi-connection feature in conjunction
with other TCP Server applications, such as Virtual COM, Pair Connection, and Reverse
Telnet. For example, enabling multi-connection along with Pair connection will result in
Multi-Point Pair Connection in TCP mode as in Sec. 3.5.6 .
Fig. 3. 30