Atop Technology SE5002D User manual - Manual (Page 75)

Atop Serial Device Server
SE5002D
User Manual V. 1.1
4.4 Using Serial/IP port Monitor
4.4.1 Opening the Port Monitor
The Serial/IP Port Monitor can be opened by:
 Start→All Programs→Serial/IP →Port Monitor
 Double click the Serial/IP tray icon in the Windows notification area.
 In the Windows notification area ( Fig. 4. 3 ), right click on the Serial/IP tray icon and click
on Port Monitor to open the Port Monitor.
 Click on the Port Monitor button in the Serial/IP Control Panel.
4.4.2 The Activity Panel
Fig. 4. 14
The Activity panel provides a real-time display of the status of all Serial/IP COM ports ( Fig. 4.
14 ). If the Virtual COM Port is open and is properly configured to connect to a serial device
server, the status would be Connected. If Serial/IP cannot find the specified serial device
server, the status would be Offline.