Atop Technology SE5002D User manual - Manual (Page 36)

Atop Serial Device Server
SE5002D
User Manual V. 1.1
3.2.13 Accept Control Command from COM port
SE5002D can also accept serial control commands (RFC2217) directly from the COM port.
You can enable this option by typing 5 from “Input choice and enter (0~5): for COM1. For more
details and information about this function, please contact our Technical Support.
3.2.14 Backup EEPROM to Flash
Select “5” from “Input choice and enter (0~5):” the following screen should appear, Fig. 3.
16 .
Fig. 3. 16
 Type 1 from “Input choice and enter (0~2):” to backup the settings from the EEPROM
to the Flash. SE5002D would then show “EEPROM Backup (Yes)”.
 Type 2 from “Input choice and enter (0~2):” to erase the settings stored in the Flash.
SE5002D would then show “EEPROM Backup (No)”.