Atop Technology GW51C-MAXI-WDT User manual - Manual (Page 66)

User manual Version 1.4
GW51C-MAXI Serial Server
Copyright © 2004 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
65 / 68
D3.4.7 Export Setting…
If a network has a large number of devices which are used for a same purpose, it would be very
complicated to carry out the parameter configuration for each of the devices in the network one by one,
while the user can save the parameter information of a standard device into a parameter file through the
submenu option Export setting… or clicking the Export setting… button on the toolbar, thus the
parameter information can be led in over again from this parameter file when the user is to carry out a
configuration for any other device, shown as the figure below:
The user can also select several devices at one time, and save the parameter information of these
selected devices into a designated parameter file by selecting "Save all the selected devices".
D3.4.8 Virtual COM
Some devices are supplied with the function of virtual serial port, and the user can carry out any related
setting through the submenu option "Virtual COM", shown as the figure below: