4 configure by web browser – Atop Technology GW51C-MAXI-WDT User manual User Manual

Page 25

User manual Version 1.4

GW51C-MAXI Serial Server

24 / 68

6. Once Hyper Terminal is connected, enter in username and password then the following Hyper

Terminal window appears,

7. The following configuration operations are totally the same as those by Telnet.

8. After finishing console settings, power off GW51C-MAXI Serial Server, put SW1 and SW2 back to the

previous setting.

4.4 Configure by web browser

It is also possible to modify various settings through the web server interface. To do so, please follow the
steps below.

Log in to the system

1. From web browser, enter in the IP address of GW51C-MAXI Serial Server in the URL.

Example: http://10.0.50.100

2. The following authentication screen appears. Please enter in user name and password then click on

OK. The user name is admin and password is null by default.