Atop Technology GW51C-MAXI-WDT User manual - Manual (Page 14)

User manual Version 1.4
GW51C-MAXI Serial Server
Copyright © 2004 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
13 / 68
4. Software Configuration
4.1 Configure by SerialManager
Use SerialManager that comes with the product CD or diskette to configure the network parameters of
GW51C-MAXI Serial Server. As you can see from the following picture, you can change IP address,
gateway IP address, subnet mask, user ID and password of GW51C-MAXI Serial Server from the utility.
For more details of the utility please refer to Appendix-D Configuration Utility.
4.2 Configure by Telnet utility
You can use Telnet utility to change configuration settings of GW51C-MAXI Serial Server. To do so, please
do the following.
Log in to the system
Using the following command Telnet to GW51C-MAXI Serial Server “Telnet IP_address”.
For example Telnet 10.0.50.100
1. After telnet to GW51C-MAXI Serial Server, system prompts for a password, the default password is
null (leave it blank).
Note: One can press the default button of GW51C-MAXI Serial Server to reset the password to the
default value.