Atop Technology GW51C-MAXI-WDT User manual User Manual

Page 29

Text mode
Original mode

User manual Version 1.4

GW51C-MAXI Serial Server

28 / 68

LINK1 Setup

1. Click on the “COM1” link and the following screen appears, one can configure GW51C-MAXI Serial

Server as transparent mode by default. Configure GW51C-MAXI Serial Server as TCP server and the
local port is 4660, IP filter is disabled by default, if IP filter is enabled, only source IP 10.0.29.11 can
connect to GW51C-MAXI Serial Server.

Configure GW51C-MAXI Serial Server as TCP client, the destination IP is 10.0.29.11, destination port is
4660.

Pair Connection (Tunneling Mode)

In the case of the serial connection is established with two or more GW51C-MAXI Serial Server to send
data over Ethernet network, i.e. pair connection mode, one can choose “pair connection” which is
indicated in the following figure to cope with any type of serial device.