Atop Technology GW51C-MAXI-WDT User manual User Manual

Page 36

User manual Version 1.4

GW51C-MAXI Serial Server

35 / 68

and/or password every time an application tries to use the serial server.

5. Click

the

Configuration Wizard button and then click the Start button that appears in the wizard

window. This important step verifies that the Virtual COM Redirector can communicate with the
serial server using the settings one have provided. If the Log display does not show errors, click
the Use Settings button in the wizard, which makes the recommended settings effective and
returns one to the Control Panel to continue with the following steps.

6. For Connection Protocol, the setting must match the TCP/IP protocol that the serial server

supports. The Configuration Wizard is usually able to determine the correct setting.

For COM Port Options, the settings must match the COM port behavior expected by the PC
application that will use this COM port. The Configuration Wizard will recommend a combination
of settings.