Atop Technology GW51C-MAXI-WDT User manual - Manual (Page 44)

User manual Version 1.4
GW51C-MAXI Serial Server
Copyright © 2004 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
43 / 68
Appendix A: GW51C-MAXI Serial Server Specifications
A.1. Hardware Specifications
Specifications
CPU
16-bit Embedded CPU
100MHz
Flash Memory 512K Bytes
SDRAM 512K Bytes
EEPROM 512 Bytes
Host Communication IEEE802.3 base band
TCP/IP, UDP, SNMP, HTTP, Telnet, ARP, BOOTP, DHCP
Reset Built-in default key to restore factory default settings
Watch Dog Timer 1.34 second hardware auto reset
Power failure threshold: 4.75V
Serial Port
Communication One RS-232 or RS-485 selectable
RS-232: EIA-RS-232C standard, Full Duplex, 8 pins Mini-DIN or 5 pins
terminal block
RS-485: 2/4 wires, Half/Full duplex, 8 pins Mini-DIN or 5 pins terminal
Parameters
1) Baud-rate: 1200 bps ~ 230400 bps
2) Parity: None, Even, Odd, Mark, Space
3) Data bits: 7,8
4) Stop bits: 1,2
5) Packet Delimiter: by inter-character timeout, by characters delim
6) Flow Control: None, Hardware CTS/RTS, Software Xon/Xoff
LED indication RUN x 1
LAN x 1
COM port1
Power Requirement +9~30Vdc, 2.8 Watt Max
Temperature Operation:
Storage:
0℃ to 60℃
-40℃ to 70℃
Humidity 20%~90% non-condensing
Housing 91mm(L) x 46mm(W) x 76mm(H)