Atop Technology GW51C-MAXI-WDT User manual User Manual

Page 15

Text mode
Original mode

User manual Version 1.4

GW51C-MAXI Serial Server

14 / 68

2. After verifying the password, the following terminal screen appears.

NOTE:

1. If GW51C-MAXI Serial Server does not receive any command within 1 minute, Telnet will be

terminated automatically.

2. The changes of networking parameters will take effect only when you exit and restart GW51C-MAXI

Serial Server.

3. Select “1” from “Input choice and enter (0~4):” to enter overview page as following:

This page gives one the general information of GW51C-MAXI Serial Server including IP and MAC address,
SNMP information, kernel and AP version, and connection status of the device.

Networking

Select “2” from “Input choice and enter (0~4):” to enter Networking page as following: