Atop Technology GW51C-MAXI-WDT User manual User Manual

Page 17

Text mode
Original mode

User manual Version 1.4

GW51C-MAXI Serial Server

16 / 68

Note: One can press the default key of product to reset password to the default value.

COM1 Setup

Select “4” from “Input choice and enter (0~4):” the following screen appears:

The page gives you the opportunity to configure parameters of COM1 setting which include COM1
working mode, port parameters, enabling or disabling serial buffer’s data and setting packet delimiter.

LINK1 Setup

Enter in 1 from “Input choice and enter (1~4):” of COM1, the following screen appears. Configure
GW51C-MAXI Serial Server as TCP server and the local port is 4660. IP filter is disabled by default, if IP
filter is enabled, only source IP 10.0.0.154 can connect to GW51C-MAXI Serial Server.

Note: IP filtering function is disabled if setting FILTER_IP to “0.0.0.0”.