Atop Technology GW51C-MAXI-WDT User manual User Manual

Page 64

User manual Version 1.4

GW51C-MAXI Serial Server

63 / 68

TCP

Server

mode

TCP

Client

mode

UDP mode

3． COM port property: it mainly represents the working parameter of the serial port setting, including:

serial-port working type, baud rate, data bit, stop bit, parity bit, data packet delimiter and flow control,
etc.

D3.4.3 Locate

The user can apply this function to locate a device when he knows it’s IP address, but doesn’t know its
position. If a device is selected, the device will appear with singing by which the user can locate

the

device through the submenu option Locate or clicking the Locate button on the toolbar.

D3.4.4 Reset

The device should be restarted after a successful modification of parameter configuration. And the user
can carry out a restart through the submenu option Reset.

D3.4.5 Erase Flash

Some devices are supplied to the user with a certain capacity of Flash memory to save the user's data.
And the user can erase the Flash through the submenu option Erase Flash or clicking the Erase Flash
button on the toolbar when the memory capacity is to be used up or the history data are unnecessary to
be saved.