AirLive Traveler3G User Manual
Page 82
6. General Setup
AirLive Traveler 3G User’s Manual
80
Enable Port
Check this box to enable port mapping, and uncheck this box to
Forwarding
disable port mapping.
Private IP
Input the IP address of the computer on local network which
provides internet service.
ype
Select the type of connection, TCP or UDP. If you’re not sure, please
select “Both”.
ort Range
Input the starting port number in the left field, and input the ending
Port Forwarding
All existing port forwarding mappings will be displayed here.
Table
Delete
Please select a port forwarding mapping by clicking the “Select” box
of the mapping, then click “Delete Selected” button to remove the
mapping. If there’s no existing mapping, this button will be grayed
out.
Delete All
Delete all mappings existed in virtual server table.
Reset
Unselect all mappings.
After you finish with all settings, please click “Apply” button and the following message will
be displayed on your web browser:
Computer Name
Pull down the menu and all the computers connected to the router
will be listed here. You can easily to select the computer name
without checking the IP address of the computer.
T
P
port number in the right field. If you only want to redirect a single port
number, just fill the port number in the left field.
Comment
Please input any text to describe this mapping, up to 16
alphanumerical characters.
Add
Add the mapping to port forwarding table.
eset
Remove all inputted values.
R