AirLive Traveler3G - Manual (Page 13)

2. Installing the Traveler 3G
11 AirLive Traveler 3G User’s Manual
2.6 Interface
Item Name Description
LAN/WAN
Switch
Switch the Ethernet port to LAN or WAN. Switch to WAN function if
you want to access to the Internet through your xDSL or Cable
modem network service. WAN access can also be a back up for 3G
network. Please refer to Section 6.8 for more details
WPS
Start WPS function or reset the router to factory default settings (clear
all settings). Press this button and hold for over 10 seconds to restore
all settings to factory defaults, or press this button for less than 5
seconds to start WPS function
ON/OFF Switch the button to activate or deactivate the router
DC in
Connect the supplied power adapter to this mini USB port to charge
the battery
RJ-45 Port Local/ Wide Area Network (LAN/WAN) port
2.7 Restore Settings to Default
If you have forgotten IP address or password, you can restore your Traveler 3G to the
default settings by pressing on the “WPS” button for more than 10 seconds. Please see
diagram below for details.