AirLive Traveler3G User Manual
Page 79
6. General Setup
77
AirLive Traveler 3G User’s Manual
ut the range of remote (destination) port number that will
to apply this rule on port 80 to 90,
a single port,
stination) IP
address and /or port number is universal, just leave it blank.
Traffic Type
Please select the traffic type of this rule, available options are None,
SMTP, HTTP, POP3, and FTP. You can select a specific traffic type
for this rule, if you want to make this rule as a IP address based rule
(apply the limitation on all traffics from / to the specified IP address /
port number), select “None”.
Protocol
Please select the protocol type of this rule, available options are
TCP and UDP. If you don’t know what protocol your application uses,
please try “TCP” first, and switch to “UDP” if this rule doesn’t seems
to work.
After you finish with all settings, please click “Save” button, you’ll be brought back to
previous menu, and the rule you just set will appear in current QoS table; if you did anything
wrong, you’ll get an error message when you click “Save” button, please correct your input
y the instructions given by the error message.
Remote Port Range Please inp
be affected by this rule. If you want
please input “80-90”; if you want to apply this rule on
just input the port number, like “80”.
If the remote (de
b
If you want to erase all values you just entered. Click “Reset”.