AirLive Traveler3G User Manual
Page 60
6. General Setup
AirLive Traveler 3G User’s Manual
58
Enable Static
Check this box to enable this function, otherwise uncheck it to
DHCP Leases
disable this function.
MAC Address
Input the MAC address of the computer or network device (total 12
characters, with character from 0 to 9, and from a to f, like
“001122aabbcc”)
IP address
Input the IP address you want to assign to this computer or network
device.
CP leases table.
After you clicked “Add”
dress mapping will be added to “Static
HCP Leases Table” section.
Add
After you inputted MAC address and IP address pair, click this button
to add the pair to static DH
If you want to remove all characters you just entered, click “Clear”.
, the MAC address and IP ad
D
If you want to delete a specific item, please check the “Select” box of a MAC address and
” button; if you want to delete all mappings, click
elete All”.
IP address mapping, then click “Delete
“D
After you finish all LAN settings, please click “Apply” button on the bottom of this page. After
you click “Apply”, the following message will be displayed on your web browser:
Please click “Continue” to back to previous setup menu; to continue on router setup, or click
“Apply” to reboot the router so the settings will take effect (Please wait for about 60 seconds
while router is rebooting).