AirLive Traveler3G - Manual (Page 11)

2. Installing the Traveler 3G
9 AirLive Traveler 3G User’s Manual
2.4 Getting Start
Before to use the AirLive Traveler 3G, please follow the instructions to charge the 3G router.
1. Remove the battery cover in the
rear side of the router, and insert
the supplied battery into the slot
and then put back the cover.
2. Connect the power adapter to the
wall socket, and then connect it to
the mini USB port of the router to
charge the battery.
3. When the battery is charged, the
“Power” LED is lit in orange color.
When the “Power” LED is not lit,
the battery is charged completely.
4. Switch the button to “ON” to
activate the router
Warning:
1. Always switch the device off before removing the battery.
2. Use only battery and power adapter supplied with the product. The use of any other
types may be dangerous
.