AirLive Traveler3G - Manual (Page 58)

6. General Setup
AirLive Traveler 3G User’s Manual 56
6.3 LAN
er conn
ddress that can comm
ic IP address (set the IP
it will save a lot of time
e a lot of computers in
de services to other computer
ome f
an locate the server.
er”, and “Static DHCP Leases Table”. Here are setup
structions for each of them.
6.3.1 LAN IP Address
Before comput ects to router’s LAN port and access Internet, it must have an IP
unicate with router.. a
here are two ways to assign IP addresses to computer: stat T
address for every computer manually), and dynamic IP address (IP address of computers
will be assigned by router automatically.
It’s recommended for most of computers to use dynamic IP address,
n setting IP addresses for every computer, especially when there ar o
your network; for servers and network devices which will provi
nd users that c rom Internet, static IP address should be used, so other computes a
c
Please click “LAN” menu on the left of web management interface, there are three setup
groups here: “
LAN IP”, “DHCP Serv
in
IP address Please input the IP address of this router.
ubnet Mask Please input subnet mask for this network.
02.1d Spanning If you wish to activate 802.1d spanning tree function, select
ree “Enabled” for setup item “802.1d Spanning Tree”, or set it to
“Disabled”.
HCP Server If you want to activate DHCP server function of this router, select
“Enabled”, or set it to “Disabled”.
S
8
T
D