AirLive Traveler3G - Manual (Page 36)

5. Quick Setup
AirLive Traveler 3G User’s Manual 34
5. Quick Setup
AirLive Traveler 3G User’s Manual 34
5.3 Basic Setting
Wireless Module Please click “Enable” to start using the wireless function of this
t of “Band”. It allows
1n mode. You
P select 802.11b,
802.11g and 802.11n connection automatically.
Default SSID is “airlive”, it’s recommended to change default SSID
name to the one which is meaningful to you, like my home,
office_room1, etc.
hannel Number Please select a channel from the dropdown list of “Channel Number”,
available channel numbers are 1 to 13 for European countries, 1 to
11 for USA. You can choose any channel number you want to use,
and almost all wireless clients can locate the channel you’re using
automatically without any problem. However, it’s still useful to
remember the channel number you use, some wireless client
supports manual channel number select, and this would help in
certain scenario when there is some radio communication problem.
s Click “Show Active Clients” button, then an “Active Wireless Client
Table” will pop up. You can see the status of all active wireless
stations that are connecting to the access point.
router, or select “Disable” to close the wireless interface of this
router.
Band
Please select a Bane type from the dropdown lis
you to set the AP fix at 802.11b or 802.11g or 802.1
also can select B+G or B+G+N mode to allow the A
SSID
This is the name of wireless router.
You can type any alphanumerical characters here, maximum 32
characters. SSID is used to identify your own wireless router from
others when there are other wireless routers in the same area.
C
Associated Client