AirLive Traveler3G - Manual (Page 63)

6. General Setup
61 AirLive Traveler 3G User’s Manual
r wireless routers in the same area. Default SSID is “airlive”, you
hannel Number Please select a channel from the dropdown list of “Channel Number”,
available channel numbers are 1 to 13 for European countries, 1 to
11 for USA. You can choose any channel number you want to use,
and almost all wireless clients can locate the channel you’re using
automatically without any problem. However, it’s still useful to
remember the channel number you use, some wireless client
supports manual channel number select, and this would help in
certain scenario when there is some radio communication problem.
Associated Clients
Click “Show Active Clients” button, then an “Active Wireless Client
Table” will pop up. You can see the status of all active wireless
stations that are connecting to the access point.
othe
can change default ESSID name to the one which is meaningful to
you, like myhome, office_room1, etc.
C
If you d
wireless
to maxim
on’t have special reason to limit the type of allowed
client, it’s recommended to choose “2.4 GHz (B+G+N)”
ize wireless client compatibility.
You can try to change channel number to another one if you
think the data transfer rate is too slow. There could be some
other wireless routers using the same channel, which will disturb
o communication between wireless client and the the radi
wireless router.
After you finish the wir
following message will
eless setting, please click “Apply” button, after you click “Apply”, the
be displayed on your web browser:
” to back to previous setup menu; to continue on router setup, o Please click “Continue r click
pply” to reboot the router so the settings will take effect (Please wait for about 60 seconds “A
while router is rebooting).