AirLive Traveler3G User Manual
Page 42
6. General Setup
AirLive Traveler 3G User’s Manual
40
Host Address
Input the IP address of the remote host you wish to initiate a
management access.
Port
You can define the port number of this router for the incoming
request. If you’re providing a web service (default port number is 80),
you should try to use other port number. You can change the default
port setting to “8080”, or something like “32245” or “1429”. (Any
integer between 1 and 65534)
Enabled
Select the field to start the configuration.
When you finish with all settings, click “Apply”, and you’ll see the following message
displayed on web browser:
Press “Continue” to save the settings made and back to web management interface; press
“Apply” to save the settings made and restart the router so the settings will take effect after
it reboots.