AirLive Traveler3G - Manual (Page 103)

6. General Setup
101 AirLive Traveler 3G User’s Manual
6.8 Fail Over
AN failure detection works by detecting the presence of traffic on the 3G modem link. If
is idle for too lo
not reply, the router a empts to fail over to Ethernet WAN
nk.
W
the link
ng the router will attempt to ping a target IP address. If the ping does
ssumes the link is down and att
li
WAN FailOver Check this box to enable Fail Over function.
WAN Priority
Please select the WAN connection priority from the drop-down
menu.
Idle Timeout
Please input the idle time for detecting the Internet connection. If the
priority of WAN connection.
Detect major Internet connection is idle for this amount of time then the
router will send a ping to the target IP Address you have assigned. If
the ping gets a reply, the router will restart the idle timer, otherwise it
will failover to the second
The router will not connect back to the first priority of Internet
Ping Target IP
Please input the target IP address you wish to ping out. If the major
Internet connection is idle for too long the router will attempt to ping
the target IP address.
-Mail Notification If you enable E-Mail Notification function, when the WAN connection
fails the router will automatically attempt to connect to the second
priority of WAN connection and mail a notification to you.
E