AirLive Traveler3G User Manual

Page 53

6. General Setup

AirLive Traveler 3G User’s Manual

Please input the MTU value of your network connection here. If you

ction for detailed descriptions.

connection is interrupted, the router will re-connect automatically.

Connect On-Demand – Only connect when you want to surf the
Internet. “Idle Time Out” is set to stop the connection when the
network traffic is not sending or receiving after an idle time.

Manual – After you have selected this option, you will see the
“Connect” button and “Disconnect” button, click “Connect” and the
router will connect to the ISP. If you want to stop the connection,
please click “Disconnect” button.

Idle Time Out

If you have selected the connection type to “Connect-On-Demand”,
please input the idle time out.

When you finish with all settings, please click “Apply”; and the following message will be
displayed on your web browser:

don’t know, you can use default value.

Connection Type

Please select the connection type of Internet connection you wish to
use, please refer to last se

Continuous – The connection will be kept always on. If the

Please click “Continue” to back to previous setup menu; to continue on other setup
procedures, or click “Apply” to reboot the router so the settings will take effect (Please wait
for about 60 seconds while router is rebooting).

you want to reset all settings in this page back to previously-saved value, please click

If
“Cancel” button.