AirLive Traveler3G User Manual
Page 23
4. Web Management
21
AirLive Traveler 3G User’s Manual
luding:
t
emote ma agement
t n (Chapter 6.1).
N - define the WAN type, configure DNS, DDNS setting (Chapter 6.2)
LAN - change LAN IP address, enable/disable DHCP server (Chapter 6.3)
NAT - configure port forwarding, virtual server, UPnP, and ALG (Chapter 6.6)
cking, DMZ, and DoS setting.
Status: This section for monitoring the status of Traveler 3G. It provides
information on Int
Status, System Log, Security Log,
Active DHCP Client, Statistics, and Modem Info.
Tool: backup or restore system’s config file, upgrade firmware, reset device as
default setting, and reboot Traveler 3G..
Genera
Sys
func
WA
l Setup: All operation settings are in this category, inc
em - set time zone, change password, configure r
n
io
Wireless - configure wireless basic, advanced, security setting, and the
wireless access control, WPS (Chapter 6.4)
QoS - define bandwidth control (Chapter 6.5)
Firewall - configure access control, URL blo
(Chapter 6.7)
Fail Over - enable/disable WAN Fail Over function, and select the WAN port as
the primary or backup one. (Chapter 6.8)
ernet Connection, Device