AirLive Traveler3G User Manual

Page 77

6. General Setup

AirLive Traveler 3G User’s Manual

You can set the limit of total upload bandwidth in kbits.

lick “add” button to add a new QoS rule.

“Edit” button.

Only

one rule should be selected a time! If you didn’t select a rule
before clicking “Edit” button, you’ll be prompted to add a new rule.

elete selected rules by clicking this button. You can select

one or more rules to delete by check the “select” the box of the

oS table is empty, this

button will be grayed out and can not be clicked.

, this button will be grayed out

and can not be clicked.

Move Up

You can pull up the priority of the QoS rule you selected by clicking
this button.

Move Down

You can lower the priority of the QoS rule you selected by clicking
this button.

After you finish with all settings, please click “Apply” button and the following message will
be displayed on your web browser:

Total Upload
Bandwidth

To disable upload bandwidth limitation, input “0” here.

Current QoS

All existing QoS rules will be displayed here.

Table

Add

Edit

If you want to modify the content of a specific rule, please check the
“select” box of the rule you want to edit, then click

Delete Selected

You can d

rule(s) you want to delete a time.

If the Q

Delete All

By clicking this button, you can delete all rules currently in the QoS
table.

If the QoS table is empty

k “Continue” to back to previous setup menu; to continue on other setup

you want to reset all settings in this page back to previously-saved value, please click

Please clic
procedures, or click “Apply” to reboot the router so the settings will take effect (Please wait
for about 60 seconds while router is rebooting).

If
“Cancel” button.