AirLive Traveler3G User Manual
Page 65
6. General Setup
63
AirLive Traveler 3G User’s Manual
Set the wireless data transfer rate to a certain value. Since most of
wireless devices will negotiate with each other and pick a proper
data transfer rate automatically,
it’s not necessary to change this
value unless you know what will happen after modification.
N Data Rate
Same as above, but only for 802.11n clients.
Channel Width
Set channel width of wireless radio.
Do not modify default value if you don’t know how to configure
it, default setting is “Auto 20/40 MHz”.
Preamble Type
Set the type of preamble.
Do not modify default value if you don’t know what it is, default
setting is “Short Preamble”.
Broadcast ESSID
Decide if the wireless router will broadcast its own ESSID or not. You
can hide the ESSID of your wireless router (set the option to
“Disable”), so only people those who know the ESSID of your
wireless router can get connected.
CTS Protect
Enabling this setting will reduce the chance of radio signal collisions
between 802.11b and 802.11g/n wireless access points. It’s
recommended to set this option to “Auto” or “Always”. However, if
you set to “None”, your wireless router should be able to work fine,
too.
Tx Power
You can set the output power of wireless radio. Unless you’re using
this wireless router in a really big space, you may not have to set
output power to 100%.
This will enhance security (malicious /
unknown users in distance will not be able to reach your
wireless router).
ce the data transfer
need it, it’s safe to set this option to
s “Disable”.
fter you finish Advanced Wireless Settings, pl
displa
DTIM Period
Set the DTIM period of wireless radio.
Do not modify default value if you don’t know how to configure
it, default value is 3.
Data Rate
WMM
The short of Wi-Fi MultiMedia, it will enhan
performance of multimedia contents when they’re being transferred
over wireless network.
If you don’t know how to configure it or
you are not sure if you
“Enable”, and however, default value i
A
ease click “Apply” button, and the following
message will be
yed on your web browser: