AirLive MW-2000S User Manual
Page 9
Chapter 2. System Overview
AirLive MW-2000S User’s Manual
4
y
Traffic History and Session Log
MW-2000S features daily and monthly report to calculate the network access statistics of users; Session
Log function records Source IP/MAC address, Destination IP/MAC address, port number, account name,
and the time.
Note: Please refer to the following chapter and learn more configurations to accomplish the Hotspot environment:
Chapter 3.2 – Quick Software Configuration
Chapter 7.1 – System Configuration
Chapter 7.2 – User Authentication
Appendix B – An Example of User Login
Appendix D – Accepting Payment via Authorize.net
Appendix E – Accepting Payment via PayPal
Appendix F – Examples of Making Payment for End Users
Appendix H – Customizable Pages
AP Management
y
Auto AP Discovery
Keep your AP in the factory default configuration, and connect it to the MW-2000S. Then press “Auto
Discover” and the MW-2000S will find all the APs for you.
y
Auto IP Address Assignment
After APs are discovered, MW-2000S will assign different IP address to each AP automatically.
y
Template Configuration
Default configurations for the AP can be defined in a template profile. So after an AP is discovered by the
security gateway, you can apply the configuration template to each AP. You no longer have to configure
each AP independently. Up to 3 configurations template can be defined.
y
View AP Status
View the wireless and LAN status and Disable or Enable each AP.
y
Detailed Configuration
Configure all the AP’s function from the MW-2000S web management interface.
y
Keep Alive Status
Up to 40 IP addresses can be set in the Keep Alive status function, so when one network device is down,
the administrator would receive email about this event.
Note: MW-2000S v2.00 build 900 version firmware currently works with WL-5460AP e10.1 firmware, and
WLA-5000AP v2.00e12 firmware. Please download the firmware from our website (
not have the correct firmware installed on WL-5460AP or WLA-5000AP. We will also announce the updated
information in AirLive website if the available firmware is changing.
Note: Please refer to the following chapter and learn more configurations to accomplish the AP Management
setting.
Chapter 7.3 – AP Management