AirLive MW-2000S - Manual (Page 146)

Chapter 7. Web Interface Configuration
AirLive MW-2000S User’s Manual
141
7.4.2 Privilege List
There are two parts, Privilege IP Address List and Privilege MAC Address List that can be set.
y Privilege IP Address List
If there are some workstations belonging to the managed server that need to access the network without getting
authenticated, enter the IP addresses of these workstations in this list. The “Remark” blank is not necessary to
be filled in but is useful in record-keeping. MW-2000S allows 100 privilege IP addresses at most. These settings
will become effective immediately after clicking Apply.
Warning: Permitting specific IP addresses to have network access rights without going through standard
authentication process at the controlled port may cause security problems.