AirLive MW-2000S - Manual (Page 145)

Chapter 7. Web Interface Configuration
AirLive MW-2000S User’s Manual 140
y Public Accessible Server
This function allows the administrator to set 40 virtual servers at most, so that the computers not belonging to
the managed network can access the servers in the managed network via WAN port IP of MW-2000S. Please
enter the “External Service Port”, “Local Server IP Address” and “Local Server Port”. According to the
different services provided, the network service can use the TCP protocol or the UDP protocol. In the Enable
column, check the desired server to enable. These settings will become effective immediately after clicking the
Apply button.
y
Port and IP Redirect
This function allows the administrator to set 40 sets of the IP addresses maximum for redirection purpose. When
the user attempts to connect to a destination IP address listed here, the connection packet will be converted and
redirected to the corresponding destination. Please enter the “IP Address” and “Port” of Destination, and the
“IP Address” and “Port” of Translated to Destination. According to the different services provided, choose
the “TCP” protocol or the “UDP” protocol. These settings will become effective immediately after clicking
Apply.