AirLive MW-2000S - Manual (Page 19)

Chapter 3. Base Installation
AirLive MW-2000S User’s Manual 14
y
Step 3: Set System Information
Home Page: Enter the URL to where users should
be directed when the user is successfully
authenticated. A default address is supplied too.
NTP Server: Enter the URL of external time server
for MW-2000S time synchronization or use the
default server address.
DNS Server: Enter a DNS Server provided by the
ISP (Internet Service Provider). Contact the ISP if
the DNS IP Address is unknown.
Click Next to continue.
y
Step 4: Select the Connection Type for WAN1 Port
There are three types of WAN ports that can be selected: Static IP Address, Dynamic IP Address and
PPPoE Client. Select a proper Internet connection type and click Next to continue.
¾ Dynamic IP Address
If this option is selected, an appropriate IP
address and related information will
automatically be assigned.
Click Next to continue.
¾ Static IP Address: Set WAN1 Port’s Static IP
Address
Enter the “IP Address”, “Subnet Mask” and
“Default Gateway” provided by the ISP.
Click Next to continue.