AirLive MW-2000S - Manual (Page 18)

Chapter 3. Base Installation
AirLive MW-2000S User’s Manual
13
3.2.2 Configuration Wizard
MW-2000S provides Configuration Wizard for network
administrators to quickly set up a basic system as a
starting point to easily test the authentication and
network connection. The 6 steps are listed below:
1. Change Admin’s Password
2. Choose System’s Time Zone
3. Set System Information
4. Select the Connection Type for WAN Port
5. Set Authentication Method
6. Save and Restart MW-2000S
Click the System Configuration from the top menu and the System Configuration page will appear. Then, click on
Configuration Wizard and click the Run Wizard button to start the wizard.
y
Running the Wizard
First, a welcome screen that briefly introduces the 6
steps will appear. Click Next to begin after
reviewing these steps.
y Step 1: Change Admin’s Password
Enter a new password for the admin account and
retype it in the verifying password field
(twenty-character maximum and no spaces).
Click Next to continue.
y
Step 2: Choose System’s Time Zone
Select a proper time zone via the pull-down menu.
Click Next to continue.