2N VoiceBlue Lite - Manual v2.6 - Manual (Page 99)

2N - VoiceBlue Lite
• Receive incoming calls + dialtone – incoming GSM calls
are received and, if defined so, the simulated dial tone is
enabled for the incoming call while awaiting digits in
DTMF.
• CallBack after ring / Reject – in case the CLIP is
included in the CallBack table, a CallBack is made. The
GSM gateway rejects the incoming call and makes an
automatic CallBack.
• CallBack after ring / Ignore – in case the CLIP is
included in the CallBack table, a CallBack is made. The
incoming call is ignored. If the calling subscriber does
not hang up within the defined timeout (default = 10s),
the CallBack function is ignored and the call is processed
normally (refer to Subs. 7.5).
• Report to PC + voice message – the GSM gateway sends
information on an incoming call to a PC equipped with
call routing software. The DTMF with a voice message
may be enabled for the incoming call.
• Report to PC + dialtone – the GSM gateway sends
information on an incoming call to a PC equipped with
call routing software. The DTMF with a simulated second
dial tone may be enabled for the incoming call.
• Min. digits in DTMF – the minimum number of digits
required by the gateway in the DTMF.
• Max. digits in DTMF – the maximum number of digits
accepted by the gateway in the DTMF.
• Tout for entering DTMF digits [s] – a timeout during which
the GSM gateway waits for the first / another DTMF digit. If
0 is selected, the incoming call is connected automatically to
the numbers included in the List of called numbers.
• Day of deleting incoming stats– defines a day in a month on
which statistical data on incoming calls are deleted. By
setting this parameter at 0 you disable this function.
• Prefix before DISA – a digital prefix to precede the DTMF
automatically.
89