2N VoiceBlue Lite - Manual v2.6 - Manual (Page 70)

8.3. Configuration Program Basic menu
The following items are available in the main configuration
program menu:
• File – for physical work with the configuration file
• Gateway – for selecting of the gateway from gateways list and
interconnecting it with VoiceBlue program.
• Gateway control – contains function for online configuration a
diagnostic of the gateway
• Settings – menu items for Communication settings and
Language setting of the configuration software.
• Help – information on the About application of the
configuration software together with contacts to the technical
support personnel.
File
This menu is accessible under (Alt + f).
• Load – is used for loading of the
configuration file of the selected
gateway to the configuration
program.
• Save – is used for saving of the
configuration to the configuration
file of the selected gataway.
• Load from disk – is used for loading an external file to the
configuration program. Structure of this file is same as of
configuration file which was selected on gateway selection
procedure, but he content is different
• Save as – is used for saving of configuration to an external file
than the one selected on gateway selection procedure.
• Default settings – sets all parameters to default values.
• Close - terminates the configuration program work.
60