2N VoiceBlue Lite - Manual v2.6 - Manual (Page 106)

Fig. 54 – Add/edit autorouting numbers
• GSM number (CLIP) – field for the GSM number, for
which will be autodial or autocallback function applied.
CLIP must be entered in the same format as is presented
by GSM network (the same as is for incoming calls
shown on GSM phone display).
• Dial (to VoIP) – incoming GSM calls will be routed to
the VoIP extension number filled in this field
• Autodial – selecting this item all incoming calls with
CLIP filled in GSM number (CLIP) will be routed to the
extension number filled in Dial (to VoIP) field.
• Autocallback – selecting of this item activates
Autocallback function. The autocallback routine is
activated after the calling party in the GSM network
hangs up. If the field Dial (to VoIP) is filled in, the
VoiceBlue Lite establishes connection to the extension in
the VoIP network while establishing of the call to the
GSM network. If the Dial (to VoIP) field is empty, the
VoiceBlue Lite establishes connection back to the GSM
and after the accepting of the call plays back the dial tone
or voice message and awaits DTMF digits.
• Limit – setup the maximum length of call. Value “0”
disables this function.
• Edit – for editing of autorouting table records. Clicking this
button opens the window shown on . Fig. 54
96