2N VoiceBlue Lite - Manual v2.6 - Manual (Page 103)

2N - VoiceBlue Lite
By completing the LCR data adding table you set one call routing
rule.
• Network ID – select a group (GSM network) from a pull-
down menu to which the routing rule should apply. The
group settings are discussed in the Network list.
• Groups – this list helps define the outgoing call groups
(refer to GSM outgoing groups). All outgoing calls are
routed to the network selected in the Network ID
parameter. The routing priority is from top to bottom.
Therefore, if the top parameter (GSM group 1) cannot be
used, the call is routed according to the parameter under
the first one.
• Time limitation of use – sets the time limit for the routing
rule defined in this menu. The time validity From – To
may include weekends too
• Max.length of call – limits the call duration to the network
selected in Network ID through the GSM group selected in
Groups. To disable the call duration limitation set the
value at 0.
• Edit – you can edit a routing rule from the LCR table by
pressing this button.
• Remove – deletes a routing rule selected from the LCR table
list.
• Remove all – removes all entries from the LCR table
• Load from gate – downloads entries of the LCR table from the
gateway
• Sae to gate - uploads entries of the LCR table to the gateway
• Save to file – saves LCR table to the configuration file of the
gateway.
• Default – sets default values of the LCR table
• Holidays list – a list of days on which VoiceBlue Lite shall
route outgoing calls according to the weekend LCR table.
• Date to move to winter time [dd:mm] – enter the day on which
summer time should be changed into winter time for LCR
purposes.
93