2N VoiceBlue Lite - Manual v2.6 - Manual (Page 72)

Fig. 29 – Communication Setting Window
Types of communication:
Serial communication - used for GSM gateway
configuration from your PC using a serial or USB cable.
The serial communication mode is suitable for the initial
setup. USB communication is suitable for detailed tracing
of the gateway. The configuration program offers available
COM ports.
TCP/IP – used for GSM gateway configuration via the
Internet or LAN. Be sure to set the correct gateway IP
address before configuring. For the IP address setting refer
to Subs. 8.2.
LOG communication:
You can set whether and how the PC - GSM gateway
communication should be saved into a file.
By clicking the “OK” button the gateway attempts to
connect to the gateway according to communication
settings.
• Application language - sets the language used for tag names.
62