2N VoiceBlue Lite - Manual v2.6 - Manual (Page 19)

2N - VoiceBlue Lite
Fig. 2 – Top View
2.2. Brief Installation Guide
• Proper mounting – 2N – VoiceBlue Lite is designed for
suspension on a vertical surface. Fit the holder included in the
delivery on a wall and hang the gateway on it. For details on
the prescribed working position and other recommendations
refer to Subs. 2.3.
• Cable connection – connect the gateway using an Ethernet
cable to your VoIP PBX (or any other VoIP terminals). For
more details on proper wiring refer to Subs. 2.4.
• Antenna connection – connect an external antenna cable into
the SMA antenna connector. Place the antenna on a place with
a good GSM signal (refer to Subs. 2.5).
• Gateway power supply – the delivery includes a mains
adapter. Make sure that an antenna has been attached to the
antenna connector before supplying voltage. Plug in the
adapter connector into the GSM gateway and the power
adapter into a wall socket. The gateway turns on immediately
(see Subs. 2.6).
9