2N VoiceBlue Lite - Manual v2.6 - Manual (Page 14)

1.1. Purpose
• The 2N - VoiceBlue Lite gateways help interconnect SIP based
VoIP networks directly with GSM networks. They can also be
used for a direct connection with a VoIP telephone set.
• The voice mode, i.e. an outgoing or incoming call, is the basic
function of the system. The gateway is equipped with all
functions necessary for such use and provides a very high
comfort in this mode.
• In addition to voice transmission, the 2N - VoiceBlue Lite
gateways enable to send and receive SMS messages.
• No extra equipment (an external GSM telephone, etc.) is
needed for normal operation. To set the basic parameters use
the configuration software included in the product CD. All
programmable parameters are default-preset in such a manner
that you can commence your telephone traffic the moment you
connect the Ethernet and supply cables, antenna and SIM card
and set the GSM and VoIP parameters.
1.2. How to Cut Telephone Costs
• Once you connect the 2N – VoiceBlue Lite gateway to your
VoIP PBX, you can make all outgoing calls to a mobile
network directly. Thus, you cut your PSTN - mobile network
call costs. All mobile telephone calls from your personnel in
the field are cheaper too.
• You are advised to use the most advantageous rate of your
GSM provider for your GSM gateway because all gateway
user call accounts are added up for billing purposes.
• You can bar selected numbers or groups of numbers in your
gateway. You shall pay nothing for the calls you have
barred.
• 2N - VoiceBlue Lite keeps detailed records on all calls. This
helps you find out easily why your bill is higher than it
should be.
• The Least Cost Router is flexible enough to help you set rules
for GSM calling at the lowest possible operation costs.
4