Changing the oil filter, Changing the oil filter -114, Engine oil viscosity -114 – JLG 1250AJP Service Manual User Manual

Page 162

Text mode
Original mode

SECTION 3 - 1CHASSIS & TURNTABLE

3-114

– JLG Lift –

3121171

WHEN DRAINING HOT ENGINE OIL THERE IS A RISK OF SCALD-
ING.

DO NOT LET USED OIL RUN INTO THE SOIL; COLLECT THE USED
OIL IN A CONTAINER SUITABLE FOR DISPOSAL OR RECYCLING.
DISPOSE OF THE USED ENGINE OIL IN ACCORDANCE WITH ENVI-
RONMENTAL REGULATIONS.

1. Drain the oil.

2. Close the oil drain valve.

3. Pour in new engine oil. Refer to Section 1 for capac-

ity and refer to Figure 3-62., Engine Oil Viscosity for
the proper grade.

Changing the Oil Filter

1. Wipe the area around the filter to clean any dirt from

the area.

2. Using a suitable oil filter removal tool, loosen the

lube oil filter cartridge and spin off.

3. Catch any escaping oil.

4. Clean any dirt from the filter carrier sealing surface.

5. Lightly oil the rubber gasket on the new oil filter.

Figure 3-62. Engine Oil Viscosity