Eppendorf PatchMan NP 2 - Manual (Page 33)

78
In addition to the speed setting (press and hold down "Speed" key) and position storage key
functions, there are also other special functions operated via the keypad.
5.4.1 General-Reset
The general reset resets the device to its delivery defaults. All the parameters, including the
installation parameters, are reset to their factory defaults.
Execution:
– Switch device to Standby.
– Press "Standby" to switch device on again and then immediately press and release "Home"
key.
The device runs through a lengthy initialisation phase.
5.4.2 Software version polling
As a software version polling facility, the version number can be indicated acoustically.
The version number is given in three signal sequences, with the digit 0 represented as 10.
Execution:
– Switch device to Standby
– Press "Standby" to switch device on again and then immediately press and release "Axial"
key.
The device runs through the initialisation phase and the acoustic output begins.
5.4 Parameter setting via keys
5 User control and mode of operation
User control and mode of operation
5
05_Bedien_e.fm Seite 78 Dienstag, 16. August 2005 3:18 15