Eppendorf PatchMan NP 2 - Manual (Page 20)

65
According to the mounting mode on the left
side of the adapter.
Note: The installation is carried out according
to the planned mounting (section 5.4.3).
4.3.2 Assembling the capillary holder
On the X module is the X head (1) for tool
mounting.
It is attached to the X module by one M3x12
screws as shown in the illustration.
The X head can accommodate tools with a
diameter of 4 mm, such as the universal
capillary holder (accessory FemtoJet
®
or
CellTram).
The universal capillary holder is inserted into
the head after the knurled screw has been
slackened, and then fixed in place by re-
tightening the knurled screw.
0
40°
40°
20°
20°
1
0
40°
40°
20°
20°
Installation
4 Installation
4
04_Install_e.fm Seite 65 Dienstag, 16. August 2005 3:17 15