Eppendorf PatchMan NP 2 - Manual (Page 16)

61
4.2.4 Assembling the X head
Set the X head with the hole (2) at the
tool mount (1) of the X module. The
fitting pin must be fitted into the hole
provided. Fix the X head to the
X module by the M3x12 cheese head
screw.
4.2.5 Assembling the hinged bracket
Set up the hinged bracket according to the side on
which the module unit is to be mounted.
Example of left side mounting:
The hinge
(2) is positioned at the left outer, aligned
upwards and to the rear.
For right side mounting, the hinge must be at the right
outer (not visible here, on the rear).
The module unit is mounted from the front onto the
hinged bracket (1).
0
40°
40°
20°
20°
2
1
2
1
1
4 Installation
Installation
4
04_Install_e.fm Seite 61 Dienstag, 16. August 2005 3:17 15