Snorkel AB46J - Manual (Page 55)

❑
From Platform Control Box
When you operate from the platform control box,
be sure that the lanyard of your fall restraint is
attached to an anchor point on the platform
mount. Also, be sure the gate is closed. Each of
the ways the platform can move is shown in the
following photograph and switch illustration:
The photograph shows the platform switches that
cause the platform or booms to move.
These platform-moving switches, (1 through 7),
will produce the movement as indicated by the
illustration's to the right.
You must be stepping on the platform foot switch
(9) when you use any of the platform-moving
switches (1 through 7) or the Drive/Steer
Controller to move the platform. The platform foot
switch is a safety feature to prevent the platform
from moving if a platform-moving switch, or
controller, is accidentally pushed.
If no Drive Function has been utilized for 5
minutes; then the footswitch will have to be
recycled.
Platform control box operation
platform-moving switch illustration:
AB46J – 0163187 page 8 - 5
8. Operation
RISER LIFT
UP
DOWN
JIB
UP
DOWN
SWING
CW CCW
PLATFORM ROTATE
CW CCW
UP
DOWN
MAIN BOOM LIFT
PLATFORM LEVEL
UP
DOWN
1. Main Boom Lift 2. Extend/Retract
4. Turntable Swing
6. Platform Rotation
3. Jib Boom
5. Platform Level
7. Riser Lift
EXTEND
RETRACT