Platform foot switch 6-9, Chassis controls 6-9, Battery switch 6-9 – Snorkel AB46J User Manual
Page 37: Battery charger 6-9, Input voltage switch, 6-9, Platform foot switch, 6-9, Platform foot switch -9 chassis controls -9, Battery switch -9 battery charger -9, Controls
AB46J – 0163187
page 6 - 9
6. Controls
■ Platform Foot Switch
You must step down on the platform foot switch,
and hold it down, when you use any platform
control that causes the platform to move.
Stepping on the platform foot switch activates the
other switches and controls in preparation to do
work. The foot switch is to the platform control
box what the Ground Operation switch is to the
ground control box.)
■ Chassis Controls
❑
Battery Switch
When the Battery switch is set to OFF, the
positive terminal of the battery is disconnected
from the electrical system of the AB46J.
❑
Battery Charger
Set the Battery switch to ON and connect the
battery charger to a source of power.
Set the INPUT VOLTAGE switch to 125 or 250
depending on whether you are going to plug the
battery charger into a 125 volt AC source of
power or a 250 volt AC source of power,
respectively.
For a more complete discussion of battery
charging see the “Battery Charging” description
of the “Batteries and Battery Charging” chapter 5,
in this manual.