Ground operation switch 2-3, Platform guardrails 2-3, Operator horn 2-3 – Snorkel AB46J User Manual
Page 17: Lanyard anchor points 2-3, Ground operation switch, 2-3, Lanyard anchor points, 2-3, Operator horn, 2-3, Platform guardrails , 2-3, Ground operation switch -3, Safety devices
❑
Ground Operation Switch
The Ground Operation switch prevents the
platform from moving if something accidentally
pushes one of the platform moving switches at
the ground control box.
Pushing the Ground Operation switch is an
action that MUST be performed, at the same time
as another action, to make the platform move.
❑
Platform Guardrails
The platform guardrails help protect you from
falling off the platform. Be sure the guardrails are
properly installed and that the gate is in place.
❑
Operator Horn
The operator horn is used primarily to get the
attention of people on the ground when you are
working aloft.
For the horn to work the Battery switch must be
ON and the following switches, on the ground
control box, must be set as indicated:
Platform/Ground Selector . . . . . . PLATFORM
Emergency Stop . . . . . . . . . . . . . . . Pulled Out
Master Key Switch . . . . . . . . . . . . . . . . . . . ON
❑
Lanyard Anchor Points
All personnel on the platform should attach their
fall restraint lanyards to one of the lanyard anchor
points.
AB46J – 0163187
page 2 - 3
2. Safety Devices