Snorkel AB46J - Manual (Page 52)

■ Starting From Ground Control Box
Before you begin to operate the AB46J from the
ground control box, a qualified operator must
perform the "Daily Inspection and Maintenance"
as described in chapter 7, of this manual.
None of the ground controls work when the
battery charger is plugged in. Unplug the
battery charger before you begin to operate.
To start from the ground control box do the
following:
1. Set the Battery switch (1) to ON.
2. Set the Emergency Stop switch (2) to ON
(pulled out).
3. Set the Platform/Ground Selector switch
(3) to GROUND (down).
4. Set Boom Speed (4) as shown.
5. Insert key (5) and set the Master Key
Switch (6) to ON.
The 46e is ready to begin work.
■ Starting From Platform Control Box
Before you begin to operate the AB46J from the
platform control box, a qualified operator must
perform the "Daily Inspection and Maintenance"
as described in chapter 7, of this manual.
None of the platform controls work when the
battery charger is plugged in. Unplug the
battery charger before you begin to operate.
To start the AB46J from the platform control box
you must first set some switches on the ground,
do the following:
1. Set the Battery switch (1) to ON.
page 8 - 2 AB46J – 0163187
8. Operation