Apple Macintosh Performa 5400 Series - Manual (Page 159)

2 Press the reset button on the logic board and then slide the logic board back into
the computer.
Note: When you press the reset button, some of your computer’s software
settings will change. You may want to open the control panels for the date and
time, keyboard, and mouse to make sure that they are set the way you want
them. For more information about working with control panels, see the
“Customizing Your Computer” topic of Macintosh Guide, available in the
Guide (h) menu.
1 Press the reset button.
2 Gently but
firmly push on the
vertical plate until the
logic board is solidly back in place.
158 Appendix E